What to Do When You Find Water Damage in Your Home

So, what would you do if you identify water damage in your home? You just have to take 4 essential steps to prevent irreversible damage to your home and belongings. However, first, you must inspect the common, water damage prone places to rest assured.


Photo By: Karen B Wolf Interiors, Associate ASID

Hidden Places to Look for Water Damage in Home

Building materials, when they repeatedly come in contact with water can start to degrade or rot. The situation worsens in hidden areas. You must check subfloors, underneath carpets, wood studs, roofs, basement, plywood sheathing and insulation for water damage.

* Outside door threshold, even if your wood is treated
* Window sills and painting
* Wall underneath the windows
* Underside of the dishwasher and sink
* In your washroom – next to the tub, shower, wash basin, and toilet
* The joints that connect the plumbing system, such as exterior faucets
* Next to water appliances, such as HVAC unit, washing machine, water dispenser and purifier
* Back of the dry wall (especially after a flood)
* The chimney, roof shingles, and see-through ceiling windows
* In the attic, inside closets, dark areas, and unreachable places
* In the basement of your house

Some of the common signs of water damage in these areas are:

Wooden structures and surfaces – Warping of wood, bulging or swollen wood, cracks, and soft wood

Cemented structures – Peeling wall paint, water spots on wall, and softening of walls

Odor and Appearance – Closed places affected by water damage can cause mold to grow. Molds spread musty, weird smell. Black spots on the walls, on carpet, upholsteries, and wooden furniture indicate mold growth. Molds can be white, yellow, and green colors as well.

Steps after You Find Water Damage

Leaky pipe, frozen pipe lines in winter, flood, rainwater, defected construction, excessive humidity, damaged house appliances or sump-pump are common causes of water damage.

Step 1: Identify from where the water causing a damage

Once you identify the source of water damage, the rest of the procedure is easy. Even if the damage looks small, it can grow big eventually. Once you have identified the source, try to block it temporarily. If it’s a flood due to storm or rain, make sure there are not any loose electrical wires submerged in water. Take photos of the damages to show them as evidence during claim registration.

Step 2: Notify the Water Restoration Service Provider

For serious water damage, contact your water restoration service provider within 24 hours. Call them and explain the situation so they can bring the right tools and equipment along.

Step 3: Inform Your Insurance Provider

If your insurance policy covers water damage restoration, contact the provider and register a claim. Also notify the home owner’s association or the party who’s responsible for the building maintenance and renovation. It is particularly important if you have rented an apartment.

Step 4: Wait for the Remediation

Meanwhile, remove the stuff, like furniture, clothes, important documents, and appliances from the damaged area to dry area to prevent further loss. Keep the room doors and windows open to promote cross ventilation. Do not turn any electrical appliance unless you receive a green flag from the remediation expert.

Whether you are buying a new house or an existing house, whether you are renting a condo or an apartment, or even if you are selling your property, inspect your home thoroughly for water damage signs and do the needful. Because as the proverb goes ‘a stitch in time, saves nine”, taking immediate and timely actions will help you prevent costly and devastating water damage restoration processes.

Posted in How To | Tagged , | Leave a comment

Steps in Getting a Water Heater Replacement in San Diego

Are you having troubles with your water heater? Here is how you can easily get a replacement if you live in the San Diego area!


Probably you just got out of bed to get ready for your work. But when you entered the shower room and turn on the shower, you jumped out of the cold water. And you asked yourself, “Why did that happen?” Surely, there is something wrong in there or an underlying problem. But what is it?

The answer is “It badly needs a quick fix.” This is the reason why it sends you cold water instead of a hot one. You are lucky to have noticed this kind of problem before it gets out of hand. Yet, much worse if you were not able to identify the problem. You can click here to know more about it.

So other than not getting hot water, what else could be the red flags for having a broken heater?

Causes of Water Heater Replacement

1. It creates noise.

You came across the tank and noticed that it sounds strange. You hear those rumbling noises from its inside and started asking, “What is the matter?” This is a sign that there are sediments that have formed in its bottom. This asks for immediate action.

2. The water is rusty and smelly.

When the time you open your shower or faucet and observed that the water is somewhat rusty. Rusty means having a red brownish appearance and with a metallic smell. This happens when there is corrosion either in your pipes or tank. For the tank, this happens because of the anode rod that gets easily corroded than any other metals in your tank.

3. There is a leak.

If you see a pool of water beside or around it, this only means that it is damaged. This is caused by extreme pressure. Due to the high temperature, the tank could get cracked and damaged. This must be fixed immediately because it can cause damages too in your other appliances inside the house.

4. There were previous repairs made.

You might have asked your plumber to fix it before. And doing so, it could make the same and other parts damaged. It will lead to more appointments for repair. This is one reason why your tank would need a replacement as soon as possible.

5. The tank is already old.

Nothing is permanent and even your tank could go to waste. You should know that a typical one would last only up to 10 or 12 years and it is off to go. An old tank is prone to having more problems in the future. This could also risk your family’s safety in the house.

Now that you have identified the problems in it that could bring you the hassle, this time let us learn how to replace one. Keep in mind that you can only do this if you are trained. But if not, call your plumber and have it fixed. You can check out water heater replacement San Diego and other similar resources for more helpful suggestions.

How to Replace a Gas Water Heater

In replacing the tank, make sure that you have bought the following materials to replace the old one.

Materials needed:

• New venting pipes and connectors
• Water and gas piping
• Pressure relief valve

Steps in Replacing the Heater

1. Shut down the electricity and water supply

Do this for safety purposes. You will be changing pipelines, attaching, and detaching parts. This will avoid experiencing an electric shock. Also, the water inside the tank is extremely hot. That is why it is advisable to turn the water supply off.

2. Drain the tank

You have to remove the water inside the tank because it has sediments that have damaged it. To do this, you have to get a hose that you use in the house. Attach this in the drain valve. Open the valve to get rid of it.

3. Disconnect the electrical wires

How can we find these? First, get started with the vent pipes by removing it from its place. Second, cut the cold and pipes. Third, take out the one. Finally, you can proceed to the next part.

4. Install the new heater

Remove the old one. Install the new one in its place. Make sure to use Teflon tape in the pressure relief valve. This will avoid leaks beside your tank.

5. Install the pipelines

Prepare your pipelines. Install it for the cold and hot openings. You might need dielectric nipples for this. It will help you prevent corrosion in metals.

6. Attach the vent

After installing the pipelines, you can now go to the next step. Return the vent properly in the draft hood. This will bring you to the next step, and that is setting the temperature.

7. Set the temperature

Your cold water supply valve must be turned on. After doing this, turn on the electricity to give hot water. The temperature might range from110 to 125 degrees Fahrenheit. Visit this link to know more about it.

Replacing it should not take most of your time. That is why you should ask a plumber to do this one. Remember that in doing this, you have to be very careful to not hurt yourself with the hot water inside. And be conscious not to have switch errors when removing and installing the parts.

Even though you have a lot of problems in your tank, remember that you can always call your most trusted plumber or plumbing company to help you out. You must consult this kind of situation before it is too late. Do not be afraid of having it replaced. By doing this, it will save you time and money.

Posted in How To | Tagged | Leave a comment